Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 914 of 1039 2021-09-23
Not Subject to NDA
3.24.12.2. AT#MQSNCFG2 - Configure additional MQTT-SN parameters
This command sets the optional connection parameters for the selected MQTT-SN client
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#MQSNCFG2=<instanceNumber>,<keepalive>,<clean_session>
Set command writes the MQTT-SN parameters for the specified client
Parameters:
Name
Type
Default
Description
<instanceNumber>
integer
N/A
Selects the client instance. The
list of available clients is
obtained with AT#MQSNEN? or
the read command.
To know maxClients value use
test command.
Value:
1÷maxClients
:
client instance Number
<keepalive>
integer
20
Timeout of periodic packet to
keep connection open
Values:
20
:
Default timeout 20 seconds
1÷3600
:
Timeout in seconds
<clean_session>
integer
1
Indicates whether or not a
persistent connection is
required. Without a persistent
connection, when the client is
offline all information and
messages that are queued from

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English