Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 956 of 1039 2021-09-23
Not Subject to NDA
WWAN/GNSS startup priority is stored in NVM. This is the priority
setting used from the module startup.
It is possible to change priority runtime using third parameter
WWAN/GNSS runtime priority.
At the startup, runtime priority is equal to startup priority (stored in
NVM).
For WWAN/GNSS startup priority, TBF (Time Between Fix),
constellation and static pinning a reboot is needed to make
effective the setting.
AT$GPSCFG?
Read command returns current values of <startup priority>, <TBF>,
<constellation>, <runtime priority> and <static pinning> in format:
$GPSCFG: <startup priority>,<TBF>,<constellation>,<runtime priority>,
<static pinning>
AT$GPSCFG=?
Test command returns supported values range of <parameter>,<priority>,
<TBF>, <constellation>, <runtime priority> and <static pinning>

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English