Thermo Scientific Micro-Tech 9101 - Page 227

Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J B-55
No.
Parameter
Selection
Description
16
Variables
selection
Not damped, damped, displayed
Note: This scroll is only available when
a protocol other than Printer is selected
for either Protocol port #1 or Protocol
port #2.
"Not damped" shows the raw value
without any damping, without the scale
division applied.
"Damped" applies the damping
constant from the appropriate scroll in
the Display menu, without the scale
division applied.
"Displayed" shows the values as they
would be shown on the Micro-Tech
display with the scale division applied.