102
REFERENCE TECHNICAL DATA
REFERENCE TECHNICAL DATA
THE IOP CORRECTION VALUES
Table 1 below provides the IOP correction values.
Table 1 :IOP Correction Values
WARNING
CCT Adjustments are not supported by performance data.
Corneal Thickness (µm) Correction Values (mmHg)
405 7
425 6
445 5
465 4
485 3
505 2
525 1
545 0
565 -1
585 -2
605 -3
625 -4
645 -5
665 -6
685 -7
705 -8
Correction Values according to corneal thickness of 545 µm
These correction values are modified from the work of Doughty and Zamen.
This chart was reproduced from the Review of Ophthalmology, July 2002
Leon Hemdon, MD Duke University, Glaucoma Service, Pages 88, 89,90.
NOTES
• See page 80 and 81 for details.
• The above reference technical data is for reference data of
CT-1P.
To Next Page
Loading...
