108
MAINTENANCE
FUSE CHANGE
1 Make sure the power is off and the power cable is unplugged.
2 Tilt the body slowly so that the power switch comes up and the power inlet at the bottom
can be seen.
3 Press the fuse holder with a screwdriver and turn it counter-clockwise.
The fuse holder can be taken out.
4 Replace the fuse with a spare one.
5 Press the fuse holder lightly with a screwdriver and turn it clockwise.
The fuse holder is set.
WARNINGS
• To avoid electric shock during fuse change, be sure to
unplug the power cable before removing the fuse lid.
Also, do not plug the power cable while the fuse lid is
removed.
• Always use the attached fuse (T 3AL 250V). Using any other
type may cause malfunction and/or fire.
To Next Page
Loading...
