7
GENERAL SAFETY INFORMATION
Ensuring the Safety of Patients and Operators
When operating the instrument, do not touch the patient's eye or nose.
To prevent corneal damage, do not measure a patient with corneal disease or one who’s
had corneal surgery.
To prevent corneal damage, do not measure a patient wearing a contact lens.
Tell the patient to remove the contact lens.
Handling the cord on this product or cords associated with accessories sold with this prod-
uct, will expose you to lead, a chemical known to the State of California to cause birth
defects or other reproductive harm. Wash hands after handling.
Preventing Electric Shocks and Fire
To avoid fire and electric shock, install the instrument in a dry place free of water and other
liquids.
To avoid electric shock, do not insert metal objects into the instrument body through the
vent holes or gaps.
To avoid fire and electric shock, do not put cups or other containers with liquids near the
instrument.
To avoid fire in the event of an instrument malfunction, immediately turn OFF the power
switch " " and disconnect the power plug from the outlet if you see smoke coming from the
instrument, etc. Don't install the instrument where it is difficult to disconnect the power plug
from the outlet. Ask your dealer for service.
To Next Page
Loading...
