Topcon CT-1P - OUTPUT PORT AND BAUDRATE CONFIGURATION

93
SETTING FUNCTIONS ON THE SETUP SCREEN
SETTING THE IOP ADJ FORMULA
It is possible to set printing of Center CCT Base and Adjustment Coefficient for IOP ADJ for-
mula. Before shipment, the default setting is "ON."
1 Tap the button of the set item display "IOP ADJ Formula" in "Print"
menu.
2 Tap the button and select "ON" or "OFF."
3 The setting is complete.
SETTING THE AUTO CUT
It is possible to set auto cutting. Before shipment, the default setting is "ON."
1 Tap the button of the set item display "Auto cut" in "Print" menu.
2 Tap the button and select "ON" or "OFF."
3 The setting is complete.
NOTES
Only in CT-1P.
NOTES
When the Auto cut setting is off and you need to cut a printer form,
the way is that erase the measurement value by tapping the
button, and tap the button.
Current Condition
2/2
OFF
ON
Return
Initial
Print
Comm
LAN
Special
Operator ID
TOPCON logo
Message
Message data
Printer order
Measure correction
mmHg Display on hPa
IOP ADJ Formula
ON
OFF
Input
ON
ON
ON
SIMPLE
Auto cut
ON
Options
Current Condition
2/2
OFF
ON
TOPCON logo
Message
Message data
Printer order
Measure correction
mmHg Display on hPa
IOP ADJ Formula
Return
Initial
Print
Comm
LAN
Special
ON
OFF
Input
ON
ON
ON
Operator ID
SIMPLE
Auto cut
ON
Options
ALL CLEAR
PRINT OUT