119
GENERAL INFORMATION ON USAGE AND MAINTENANCE
Observation and Fixation Target Projection:
Illuminating the test eye by near infrared light using an anterior illumination LED, display the
image received by the CCD camera unit on the control panel. Provide a visible light by a fixa-
tion LED, and the patient/examinee looks it as a fixation target through the measuring nozzle.
CHECKPOINTS FOR MAINTENANCE
1. Regularly maintain and check the equipment and parts.
2. When resuming the use after a long period of storage, verify that the instrument operates
correctly and safely.
3. To ensure the correct reading, do not mar the measuring window with finger prints, dust,
etc.
4. If the measuring window is soiled, clean it following the "CLEANING THE NOZZLE AND
THE GLASS INSIDE THE MEASURING NOZZLE" instructions on page 104.
DISPOSAL
When disposing of the instrument and/or parts, follow local regulations for disposal and recycling.
Anterior illuminationLED
Fixation LED
Measuring nozzle
Test eye
CCD camera
NOTES
This symbol is applicable for EU member countries only.
To avoid potential damage to the environment and possibly human
health, this instrument should be disposed of (i) for EU member coun-
tries - in accordance with WEEE (Directive on Waste Electrical and
Electronic Equipment), or (ii) for all other countries, in accordance
with local disposal and recycling laws.
This product contains a CRL Lithium Battery which contains Perchlorate
Material-special handling may apply.
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
Note; This is applicable to California, U.S.A. only
To Next Page
Loading...
