9
HOW TO USE THIS MANUAL
• Read the instructions on pages 7 to 11 before using the machine.
• Regarding connection to various devices, see "CONNECTING EXTERNAL I/O TERMI-
NALS" on page 29.
• If you would like an overview of the system, begin by reading "BASIC OPERATIONS"(page
33).
• For setting various functions, see "SETTING FUNCTIONS ON THE SETUP SCREEN" on
page 59.
GENERAL MAINTENANCE INFORMATION
USER MAINTENANCE
To maintain the safety and performance of the equipment, never attempt to do maintenance
except for the items specified below. For details, follow the instructions.
FUSE CHANGE
For details, See “FUSE CHANGE” on page 108.
CLEANING THE MEASURING WINDOW GLASS
For details, See “CLEANING THE INSTRUMENT” on page 103.
CLEANING THE NOZZLE AND WINDOW GLASS INSIDE THE NOZZLE
Regarding the measuring nozzle and the glass surface inside the measuring nozzle, cleaning
is allowed. For details, see "CLEANING THE NOZZLE AND THE GLASS INSIDE THE MEA-
SURING NOZZLE"on page 104.
DISCLAIMERS
• TOPCON is not responsible for damage due to fire, earthquakes, actions or inactions of third
persons or other accidents, or damage due to negligence and misuse by the user and any
use under unusual conditions.
• TOPCON is not responsible for damage derived from inability to properly use this equipment,
such as loss of business profits and suspension of business.
• TOPCON is not responsible for damage caused by operations other than those described in
this User Manual.
• The device does not provide a diagnosis of any condition or lack thereof or any recommen-
dations for appropriate treatment. The relevant healthcare provider is fully responsible for all
diagnosis and treatment decisions and recommendations.
To Next Page
Loading...
