Topcon CT-1P - Resetting the Patient no; Displaying the Patient ID

72
SETTING FUNCTIONS ON THE SETUP SCREEN
RESETTING THE PATIENT NO.
It is possible to set whether or not to reset the patient No. upon power on. Before shipment,
the default setting is "OFF."
1 Tap the button of the set item display "Patient No. reset" in the "Initial"
menu.
2 Tap the button and select "ON" or "OFF."
3 The setting is complete.
DISPLAYING THE PATIENT ID
It is possible to set whether or not to display the patient ID. Before shipment, the default set-
ting is "ON."
1 Tap the button of the set item display "Show patient ID" in the "Initial"
menu.
2 Tap the button and select "ON" or "OFF."
3 The setting is complete.
Current Condition
2/5
OFF
ON
Patient No. reset
Show patient ID
Required patient ID
Device ID number
Return
Initial
Print
Comm
LAN
Special
OFF
OFF
ON
1
Operator ID
Show Device ID number
Stand by mode
Auto power save
RIGHT
OFF
10 min
Touch Measure
OFF
Options
Current Condition
OFF
ON
Return
Initial
Print
Comm
LAN
Special
Operator ID
2/5
Patient No. reset
Show patient ID
Required patient ID
Device ID number
OFF
OFF
ON
1
Show Device ID number
Stand by mode
Auto power save
RIGHT
OFF
10 min
Touch Measure
OFF
Options