110
MAINTENANCE
MAINTENANCE
CLEANING THE COVER
1 If the cover, control panel, etc. get soiled, wipe the surface clean with a dry cloth.
2 If the cover is noticeably stained, wipe the surface with a damp cloth which is moistened in
a tepid water solution of neutral detergent.
CLEANING THE CONTROL PANEL
CONTAMINATION BY DUST
Remove the dust with a soft brush, and wipe with the attached monitor cleaner.
CONTAMINATION BY FINGERPRINTS
Wipe with the attached monitor cleaner.
If the stain still remains, moisten the monitor cleaner with water and then wipe off the
stain.
CAUTIONS
Do not use or apply any aerosol-type cleaner near the instru-
ment.
If a drop of cleaner remains inside the measuring nozzle, the
patient's eye may be injured during measurement.
NOTES
Do not clean plastic parts with solvents. Benzine, thinner, ether
and gasoline may cause discoloring and decomposition.
NOTES
• Since the control panel screen is a touch panel, be sure to turn
off the POWER switch before wiping. The touch panel will react
and malfunction.
• When the monitor cleaner has become dirty, wash it. When
washing, rinse it thoroughly so no detergent is left. If any deter-
gent remains, it may cause uneven wiping.
To Next Page
Loading...
