Topcon CT-1P - NOTATION, PACKING, AND CHARACTER SETTINGS

82
SETTING FUNCTIONS ON THE SETUP SCREEN
SETTING THE PUPIL DISTANCE
The pupil distance can be set.
Before shipment, the default setting is "68mm".
1 Tap the button of the set item display "Pupil distance" in the "Initial"
menu.
2 Tap the button and press the up or down button to set the value.
3 The setting is complete.
SETTING THE R/L MOVE
The R/L move can be set. Before shipment, the default setting is "Full Auto."
1 Tap the button of the set item display "R/L move" in the "Initial" menu.
2 Tap the button and select "Manual", "Full Auto", "Auto(RL)."
3 The setting is complete.
NOTES
• If the "Manual" is selected, move the measuring head to the
other eye side by pressing the button or button.
• If the "Full auto" is selected, the measuring head moves to the
other eye side and a measurement is performed automatically.
• If the "Auto(RL)" is selected, the measuring head moves auto-
matically to the other eye side.
Current Condition
Return
Initial
Print
Comm
LAN
Special
68mm
Operator ID
4/5
IOP Adjustment
Center CCT Base
Adjustment Coefficient
545
500
Pupil distance
R/L move
Chin rest height
Full Auto
68mm
Low
Control panel brightness
LEVEL 4
Press average Mode Integer
OFF
Options
Current Condition
Manual
Full Auto
Auto(RL)
Return
Initial
Print
Comm
LAN
Special
Operator ID
4/5
IOP Adjustment
Center CCT Base
Adjustment Coefficient
545
500
Pupil distance
R/L move
Chin rest height
Full Auto
68mm
Low
Control panel brightness
LEVEL 4
Press average Mode Integer
OFF
Options
R
L