Topcon CT-1P - Printer Output

21
COMPONENTS
PRINTER OUTPUT
Printed example when "Printer order" of "Print" is set to "SIMPLE"
NOTES
• The "M" mark is printed on the value measured by Manual
mode or on the value measured by using the start button in
Auto mode. (In the error of ERR, OVER, etc., the "M" mark is
not printed.)
• The value with low reliability is outputted with the parenthesis
notation.
-CT 010017-
OID:TOPCON_TAROU
NAME
2012_01_01
TONO. DATA
PACH. DATA
R (13)M ( 8)M 7M 7.0
L 9 ( 7) (10) 9.0
hPa AVG.
R (13)M ( 8)M 7M 7.0
L 9 ( 7) (10) 9.0
ADJ. AVG.
R 509M 518M 526M 517
L
IOP ADJ FORMULA
A
:
545 B
:
500
531 523 512 518
um AVG.
AM 11:00
TOPCON
Hello World
NO:Patient ID
SN:0000001
01
Patient No.
Barcode
• As for the patient No., the result of the printing will differ depending on whether
the patient ID is inputted or not inputted.
Input : Patient ID is printed.
Not input :Patient No. (starts from 0001, automatically added +1 upon com-
pletion of measurement) is printed.
Device ID number
Message column
Measurement date
Serial number
Title of Tono value
Tono value on display unit "hPa"
Display unit at Tono
Topcon Logo mark
Average value of CCT
Average value of
adjusted measurement value
Tono average value on
display unit "hPa"
Patient No.
(Patient ID when Patient ID is input)
Device ID number
Name entry column
Operator ID
Adjusted measurement value
Result of IOP adjustment by CCT
Title of Pacho value
Display unit at Pacho
Measured value of CCT
CT-1P
Title of IOP ADJ Formula Center CCT Base/
Adjustment Coefficient