Topcon CT-1P - Page 24

22
COMPONENTS
NOTES
• The "M" mark is printed on the value measured by Manual
mode or on the value measured by using the start button in
Auto mode. (In the error of ERR, OVER, etc., the "M" mark is
not printed.)
• The value with low reliability is outputted with the parenthesis
notation.
Patient No.
Barcode
* As for the patient No., the result of the printing will differ depending on whether
the patient ID is inputted or not inputted.
Input : Patient ID is printed.
Not input :Patient No. (starts from 0001, automatically added +1 upon com-
pletion of measurement) is printed.
Device ID number
Message column
Measurement date
Serial number
Title of Tono value
Tono value on display unit "mmHg"
Display unit at Tono
Topcon Logo mark
Tono average value on
display unit "mmHg"
Patient No.
(Patient ID when Patient ID is input)*
Device ID number
Name entry column
Operator ID
CT-1