Topcon CT-1P - CHINREST HEIGHT AND CONTROL PANEL BRIGHTNESS

81
SETTING FUNCTIONS ON THE SETUP SCREEN
SETTING THE CENTRAL CORNEA THICKNESS BASE VALUE
The central cornea thickness base value can be set.
Before shipment, the default setting is " 545."
1 Tap the button of the set item display "Center CCT Base" in the "Initial"
menu.
2 Tap the button and enter the number with the ten-key display.
3 The setting is complete by tapping the button.
SETTING THE ADJUSTMENT COEFFICIENT
The adjustment coefficient can be set.
Before shipment, the default setting is "500."
1 Tap the button of the set item display "Adjustment Coefficient" in the
"Initial" menu.
2 Tap the button and enter the number with the ten-key display.
3 The setting is complete by tapping the button.
NOTES
Only in CT-1P.
NOTES
Only in CT-1P.
Current Condition
Options
Return
Initial
Print
Comm
LAN
Special
BS
7
4
1
0
8
5
2
9
6
3
AC
OK CANCEL
Operator ID
4/5
IOP Adjustment
Center CCT Base
Adjustment Coefficient
545
500
Pupil distance
R/L move
Chin rest height
Low
Control panel brightness
LEVEL 4
Press average Mode Integer
Full Auto
68mm
OFF
OK
Current Condition
Options
Return
Initial
Print
Comm
LAN
Special
BS
7
4
1
0
8
5
2
9
6
3
AC
OK CANCEL
Operator ID
4/5
IOP Adjustment
Center CCT Base
Adjustment Coefficient
545
500
Pupil distance
R/L move
Chin rest height
Low
Control panel brightness
LEVEL 4
Press average Mode Integer
Full Auto
68mm
OFF
OK