Topcon CT-1P - SETUP SCREEN INPUT METHODS

59
SETTING FUNCTIONS ON THE SETUP SCREEN
SETTING FUNCTIONS ON THE SETUP SCREEN
OPERATING THE SETUP SCREEN
Various functions can be set on the SETUP screen.
PREPARATIONS FOR SETTING
1 Make sure that the power cable is connected.
For connection, refer to “CONNECTING POWER CABLE” on page 28.
2 Turn ON the switch.
3 Tap the button on the control panel.
The SETUP screen is displayed.
POWER
SETTINGS
PatientID
PatientID
/3
/3
/3
/3
/3
/3
/3
/3

1
1
T
OPCON
T
ARO
U
TOPCONTAROU
OFF
ON
Return
Initial
Print
Comm
LAN
Special
Operator ID
1/5
Buzzer
Start mode
Auto print
Printer
Show Tono value
Show Pacho value
Show Tono average
Show Adj value
Auto
ON
ON
ON
ON
ON
ON
ON
Return button
Index
Descriptions
Back Page button
Page display
Next page button
Current condition button
Options