Topcon CT-1P - Setting the Safety Stopper

37
BASIC OPERATIONS
5 Place the patient's chin on the chinrest and check that his/her forehead is touching to the
forehead rest.
6 Press the button to adjust the chinrest height until the eye height mark of the
chinrest reaches the same height as the patient's eye.
SETTING THE SAFETY STOPPER
1 Select the right/left eye by tapping the button/ button.
CAUTIONS
• Before measuring, set the safety stop to prevent the mea-
suring window glass from hitting the patient's eye.
Set it respectively for the right and left eyes.
• Set the safety stop from the side of the instrument.
Setting operations from other positions, where checking of
the eye position is not easy, may cause injury.
UP/DOWN
Eye height mark
Up/down button
for chinrest
PatientID
PatientID
/3
/3
/3
/3

1
1
TOPCON

TOPCON
PatientID
PatientID
/3
/3
/3
/3
/3
/3
/3
/3

1
1
T
OPCON
T
ARO
U
TOPCONTAROU
R
L