105
MAINTENANCE
5 If the fixation target is clearly seen, cleaning is completed. If stains cannot be removed
easily, call your dealer.
CLEANING THE COMPONENTS THAT COME INTO CONTACT WITH THE PATIENT
When the forehead rest and chinrest become stained, use a neutral tableware detergent and
warm water. Dip a soft cloth in the solution, squeeze out the excess water and then wipe off
the stain.
DAILY MAINTENANCE
• For this instrument, dust may cause errors. When not in use, replace the measuring window
cap and dust cover.
• When not in use, turn off the POWER switch.
ORDERING CONSUMABLE ITEMS
• When ordering consumable items, tell the product name, product code and quantity to your
dealer or TOPCON at the address listed on the back cover.
NOTES
When the glass becomes stained, "CLEAN INSIDE NOZZLE/
GLASS" is displayed on the control panel screen.
NOTES
When using the dust cover, tap the button and move the
chinrest and measuring head to their last positions.
Product name Product code Product name Product code
Chinrest tissue 40310 4082 Applicator 41601 8606
Silicon cloth 44800 1001 Printer paper 44800 4001
Dust cover 42360 9002 Fuse T 3AL 250V T2400 0158A
To Next Page
Loading...
