Topcon CT-1P - MEASURING RANGE SELECTION; ALIGNMENT AND MEASUREMENT EXECUTION

41
BASIC OPERATIONS
3 Enter the patient ID using the keyboard on the screen.
4 Return to the Measurement screen, and confirm that the patient ID is updated.
NOTES
If the patient ID is set to "OFF" in the initial setting, the patient No./
patient ID is not displayed on the measurement screen.
TOPCON_TAROU
Patient ID (13)
Operator ID (13)
Patient_ID
Keyboard
Patien
t
ID
PatientID
/3
/3
/3
/3
/3
/3
/3
/3
T
OPCON
T
ARO
U
TOPCONTAROU