Topcon CT-1P - GENERAL SAFETY INFORMATION; PATIENT AND OPERATOR SAFETY; ELECTRICAL AND FIRE SAFETY

5
SETTING THE DISPLAY UNIT OF
CORNEA THICKNESS MEASUREMENT VALUES (PACHO) .......................79
SETTING THE AVERAGE VALUE OF THE OCULAR PRESSURE
MEASUREMENT MODE .................................................................................80
SETTING THE IOP ADJUSTMENT.................................................................80
SETTING THE CENTRAL CORNEA THICKNESS BASE VALUE..................81
SETTING THE ADJUSTMENT COEFFICIENT...............................................81
SETTING THE PUPIL DISTANCE ..................................................................82
SETTING THE R/L MOVE...............................................................................82
SETTING THE CHINREST HEIGHT ...............................................................83
SETTING THE CONTROL PANEL BRIGHTNESS .........................................83
SETTING THE R/L NOTATION.......................................................................84
SETTING THE PACKING MODE....................................................................84
SETTING THE SHADED CHARACTERS .......................................................84
SETTING THE XZ MOTOR DIRECTION ........................................................85
SETTING THE MEASUREMENT DATA RECORDING WAY .........................85
SETTING THE MEASUREMENT COUNT CHANGE MODE..........................86
SETTING THE IOL LED BRIGHTNESS..........................................................86
SETTING THE PRINTER .......................................................................................87
SETTING THE BARCODE ..............................................................................87
SETTING THE OPERATOR ID .......................................................................88
SETTING THE NAME COLUMN .....................................................................88
PRINTING THE DATE.....................................................................................88
SETTING THE DATE STYLE..........................................................................89
SETTING THE PATIENT NO./ PATIENT ID....................................................89
PRINTING THE DEVICE ID NUMBER............................................................89
PRINTING THE SERIAL NUMBER.................................................................90
PRINTING THE TOPCON LOGO....................................................................90
SETTING THE MESSAGE ..............................................................................90
SETTING THE MESSAGE DATA....................................................................91
SETTING THE PRINTING ORDER.................................................................91
SETTING THE MEASUREMENT CORRECTION VALUE ..............................92
SETTING THE mmHg DISPLAY UNIT ON hPa..............................................92
SETTING THE IOP ADJ FORMULA ...............................................................93
SETTING THE AUTO CUT..............................................................................93
DATA COMMUNICATION ......................................................................................94
SETTING THE OUTPUT DATA STYLE ..........................................................94
SETTING THE FORMAT.................................................................................94
SETTING THE OUTPUT PORT ......................................................................95
SETTING THE BAUDRATE ............................................................................95
LAN CONNECTION................................................................................................96
SETTING THE LAN CONNECTION................................................................96
SETTING THE XML FILE OUTPUT ................................................................96
SETTING THE DATA OUTPUT FORMAT ......................................................97
SETTING THE SHARED FOLDER .................................................................97
SETTING THE IP ADDRESS SETTING..........................................................97
SETTING THE IP ADDRESS ..........................................................................98
SETTING THE SUBNET MASK ......................................................................98
SETTING THE DEFAULT GATEWAY.............................................................98
SETTING THE PRIMARY DNS SERVER .......................................................99
SETTING THE SECONDARY DNS SERVER.................................................99
OPERATOR ID .....................................................................................................100
SETTING THE USE OPERATOR ID FUNCTION .........................................100
SETTING THE PREFIX OF OPERATOR ID FUNCTION..............................100
SETTING THE OPERATOR ID REQUEST...................................................101
SETTING THE FIXED OPERATOR ID..........................................................101