Topcon OPUS A6G2 - Page 198

198
OPUS Projektor Manual
Variables
0x209
5
0x3
Integer
8 Bit
Read/
Write
enable
d
disabl
ed
enable
d
0
-1
2
Supported on Platforms:
i.MX 35
i.MX 6 A-Series
i.MX 6 B-Series
ISOBUS
No
Yes
No
Yes
@InputConfiguration04
"Configure input 04 for digital/analog (voltage sensor) or for current sensor operation."
Configure input 04 for digital/analog (voltage sensor) or for current sensor operation. Value
0 and 1: digital and analog operation (measured value in @DigitalInput04 and
@AnalogInput04); Value 2: current sensor operation (measured value in @AnalogInput04).
Index
Subin
dex
Stora
ge
Type
Lengt
h
Acces
s
Type
Rema
nent
Force
Writin
g
Initiali
ze as
Invali
d
Defaul
t
Value
Min
Value
Max
Value
0x209
5
0x4
Integer
8 Bit
Read/
Write
enable
d
disabl
ed
enable
d
0
-1
2
Supported on Platforms:
i.MX 35
i.MX 6 A-Series
i.MX 6 B-Series
ISOBUS
No
Yes
No
Yes
@Input1hysterese
"On devices with i.MX 35 CPU one step is approx. 11mv. On devices with i.MX 6 CPU one
step is 1mV."
The hysteresis when the analog input shall signal a value change.
For devices with i.MX 35 CPU: This is a digital value of the 10Bit A/D converter betwenn 0
and 1023. One step is about 11mV.
For devices with i.MX 6 CPU: The value represents 1mV directly.
Index
Subin
dex
Stora
ge
Type
Lengt
h
Acces
s
Type
Rema
nent
Force
Writin
g
Initiali
ze as
Invali
d
Defaul
t
Value
Min
Value
Max
Value
0x209
5
0xb
Integer
16 Bit
Read/
Write
enable
d
disabl
ed
enable
d
1
-1
1023
Supported on Platforms:
i.MX 35
i.MX 6 A-Series
i.MX 6 B-Series
ISOBUS
Yes
Yes
No
Yes
@Input2hysterese
"On devices with i.MX 35 CPU one step is approx. 11mv. On devices with i.MX 6 CPU one
step is 1mV."
The hysteresis when the analog input shall signal a value change.
For devices with i.MX 35 CPU: This is a digital value of the 10Bit A/D converter betwenn 0