505
OPUS Projektor Manual
Object Reference
Besides the Auto Wrap property, Texts in String Fields can also have custom line breaks by
inserting "\n" (without the "") in the text.
The line break can also be included at runtime via JavaScript by adding \n in a String variable
and having that referenced to the String Field or, alternatively by putting the text into the String
Field with setProperty .
Please note that for existing projects in the rare case the text "\n" should be used in a String
Field, this will now be interpreted as a line break.
In that case, please change "\n" to e.g. "\ n" to avoid the line break.
String Field Specific Properties
Auto Wrap
When Auto Wrap is enabled, the text inside the string field will be automatically wrapped to
the next line if the text does not fit inside the string field. If possible, wrapping will leave the
words in the text complete. If the string field is to narrow to display even a single word, the
single word will be splited.
If Auto Wrap is disabled, text that does not fit in the string field will be clipped.
Default value: Disabled
Possible values: Disabled or Enabled
Max String Length (Characters)
The maximum length of the text displayed in the string field can be adjusted with this
property.
Note that the value of a referenced variable or the Preview Value of the string field may
have more characters but they are just not displayed if it's more than Max String Length.
Default value: 32
Possible values: 0 ... 65536
Events
The following events can be configured for the string field object:
·
OnOpenForInput
·
OnEnabledWithFocus
·
OnEnabledWithoutFocus
·
OnValueChange
·
OnEnterValue
·
OnEnterNewValue
·
OnEscape
See here for the descriptions of all event and possible actions that can be assigned.
6.4.18
Table
A table can be used to display multiple lines of text. Each line of this text consist of the table
cell values delimited by a configurable delimiting character.
Example text for a table with ; as delimiter character:
538
430
To Next Page
Loading...