657
OPUS Projektor Manual
Device Software Update
When the copy process fails, a red cross icon is visible.
NOTE:
The copy process fails e.g. if disk space is to low, or USB device is removed during the
copy process.
10.2.1
Software Versions Overview
This page provides an overview of released program versions and what OS/BSP
combinations should be used on the devices.
Note: Since version 1.12 the version numbers of all components of the program are the same
(PC program/PClient/Downloader/etc.)
Note: When the hardware of a device has to be changed, it might be necessary to release a
new OS for that device family. The table below reflects the latest OS versions that can run on
all series versions of the devices (newest and oldest).
To Next Page
Loading...