"Keypad Intensity that is set by the bootloader at cold boot until hardware daemon is
started. This value is directly stored in the EEPROM of the device."
Keyboard Backlight Intensity that is set by the bootloader at cold boot until hardware
daemon is started. This value is directly stored in the EEPROM of the device.
Change color AND intensity of keyboard backlight at cold boot.
New device generations support the changing of the color of the keyboard backlight at cold
boot. The value that is set represents a 24Bit RGB value for color AND intensity. After
application startup the variables @KeyBacklightColor, @KeyBacklightIntensity,
@EncoderBacklightColor and @EncoderBacklightIntensity will be the master values for the
backlight intensity and color
To Next Page
Loading...