State of CAN controller 2
The following values describe the state of the CAN controller:
0x00: Controller switched off
0x01: Controller is active, no errors
0x02: Error active state
0x03: Error passive state
0x04: Bus off state
0xff: Device Error
It is possible to write the values 0 to this variable to switch the CAN controller off and 1 to
switch it on.
"Messages received by terminal in last second."
Counter of messages read from the bus during the last second.
"Messages sent by terminal in last second."
Counter of massages sent to the bus by the PClient during the last second.
To Next Page
Loading...