State of CAN controller 3
The following values describe the state of the CAN controller:
0x00: Controller switched off
0x01: Controller is active, no errors
0x02: Error active state
0x03: Error passive state
0x04: Bus off state
0xff: Device Error
It is possible to write the values 0 to this variable to switch the CAN controller off and 1 to
switch it on.
Only supported on devices with 3 or more CAN controllers.
"Messages received by terminal in last second."
Counter of messages read from the bus during the last second.
Only supported on devices with 3 or more CAN controllers.
"Messages sent by terminal in last second."
Counter of massages sent to the bus by the PClient during the last second.
Only supported on devices with 3 or more CAN controllers.
To Next Page
Loading...