Default value: 0
Possible values: -2147483648.0 ... 2147483647.0
scale:
Default value: 1
Possible values: -2147483648.0 ... 2147483647.0
Draw Boundary Bar (Theme dependent)
A colored bar can be drawn around the gauge. The bar is divided in 3 regions, following
the min and max value settings. With this property the drawing of the boundary bar can be
enabled or disabled.
Default value: Enabled
Possible values: Enabled or disabled
Boundary Bar Width Factor (Theme dependent)
The width of the Boundary Bar can be modified. The reference value (which equals a factor
of 1) is the radius of the gauge object.
Default value: 0.02
Possible values: 0.0 ... 1.0
Draw Digital Value (Theme dependent)
A digital values can be drawn inside the gauge. With this property the drawing of the digital
value can be enabled or disabled.
Default value: Enabled
Possible values: Enabled or disabled
Digital Value Font Scaling Factor (Theme dependent)
The scaling factor of the digital value can be modified. The reference value (which equals a
factor of 1) is the radius of the gauge object.
Default value: 0.25
Possible values: 0.0 ... 1.0
Digital Value Background X Offset Factor (Theme dependent)
The horizontal position of the digital value box inside the gauge can be modified. The
reference value (which equals a factor of 1) is the radius of the gauge object.
Default value: 0.35
Possible values: -1.0 ... 1.0
Digital Value Background Y Offset Factor (Theme dependent)
The vertical position of the digital value box inside the gauge can be modified. The
reference value (which equals a factor of 1) is the radius of the gauge object.
Default value: 0.35
Possible values: -1.0 ... 1.0
Digital Value Background Width Factor (Theme dependent)
The width of the digital value box inside the gauge can be modified. The reference value
(which equals a factor of 1) is the radius of the gauge object.
Default value: 0.45
Possible values: 0.0 ... 2.0
Digital Value Background Height Factor (Theme dependent)
To Next Page
Loading...