If "Draw Shadow" is enabled one can define the shadow color used to draw the shadow.
The background color of the shadow is the button background color which includes that. the
background of the shadow is transparent if the button is configured as transparent.
The button shadow consists of two areas where one is drawn in the opaque color selected
and the other is drawn in a half-transparent version of the same color.
Both colors are switched when button is pressed to simulate a kind of 3D effect of the
pressed/released button.
Default value: Black.
Possible value: Any color allowed by standard color chooser.
Latching
Latching means: When a button is pressed and released, it toggles state and stays in the
toggled state until it is pressed again.
Like that a latching button resembles a light switch whereas a non-latching button
resembles a door-bell switch.
With this property this behavior can be enabled.
Default value: Disabled
Possible values: Enabled or Disabled
Pressed State
Switch between the release or pressed state of the button. This is important for having a
preview of the object and also for adding pressed/released objects for the button (see
above).
Note: If only one child is assigned to the button the other state will be shown as empty on
PC tool but on the device this one child will show permanently - button shadow should be
used to show button state in this scenario.
This property has no influence to runtime behavior.
Default value: Disabled
Possible values:
·
Enabled (button is in pressed state)
·
Disabled (button is in released state)
Pressed Object ID
Not used for this object type.
Released Object ID
Not used for this object type.
Toggle Background Image
With this property the usage of the Pressed Image and Released Image can be turned on
or off.
Pressed Image
The image set in this property will be used as the pressed image. By default, this will be set
to the standard lamp pressed image.
Released Image
The image set in this property will be used as the released image. By default, this will be
set to the standard lamp released image.
To Next Page
Loading...