760
OPUS Projektor Manual
FAQ
setVariableValue("@CurrentDirectory",
"/opt/pclient/logfiles/");
//Set the current file name to "alarm.log", the name of the
file
setVariableValue("@CurrentFile", "alarm.log");
//Set the destination to a temporary folder which will be
deleted after restart
setVariableValue("@DestinationDirectory", "/dev/null/");
//Execute the copy/move process
setVariableValue("@CopyFileOrFolder", 2);
Please note:
- no slash before or after the file name
- @CurrentDirectory needs to be set before @CurrentFile
How can I rename my project?
There are two ways to rename a project. One is by performing a Save As action. This menu
entry can be found in the menu File -> Save As
Please note that the project will be stored in the path that is written in the Folder name
field, so the new project name has to be added after the existing path with a \ in front, e.g.:
C:\projects is the existing path, then the Folder name field needs to be C:
\projects\new_project_name.
The second way is to right-click on the project name in the project tree and select Rename
in the context menu. This will keep the project location and just change the project name
(and thus the project folder).
Please note: Manually changing the project folder name does not rename the project, and it
will lead to problems. Only use one of the methods described here.
How can I change the order in which the Encoder navigates between
objects?
The order is dependent on the Z-Order of the objects. By changing the Z-Order you can
modify in which order objects are selected.
How can I create landscape / portrait projects?
All devices can be used in landscape (widescreen / horizontal) or portrait (vertical) mode.
The distinction is made when creating a project. For every device type, a landscape or
portrait mode project can be created. This cannot be changed later (only by converting ).
Please note: For i.MX 6 device projects, when changing from a landscape to a portrait
project on the device, a restart is necessary to apply the setting.
What can I do if a font file can't be imported?
A font file can only be imported if there isn't already a font file with the same name imported
in the project. If a font comes with several files for bold, italic etc, it is possible that they
have the same name in their meta data. If this is the case, give the fonts unique names and
make sure that all name fields have the same name. Please refer to the passage Imported
Fonts in the chapter Project Properties .
151
40
76 76
To Next Page
Loading...