782
OPUS Projektor Manual
OPUS devices update manual
Once you see the RedBoot> prompt, you can let go of CRTL + C.
If this doesn’t work, close TeraTerm/HyperTerminal and start it again.
3. Have the correct boot loader file (Redboot_RAM.bin) ready on your computer.
Now enter the following command:
load -r -b 0x100000 -m ymodem
The device now waits for you to send a file.
Depending on the program you’re using, send the boot loader file using the ymodem
protocol.
For Tera Term:
To Next Page
Loading...