Trango Systems TrangoLINK GigaPlus - Page 143

Trango Systems, Inc. GigaPlus User Manual Rev 3.1 143
qos_info
port<1-4>
Port 1 DSCP mappings shown
reboot
N/A
N/A
remark
<string 1-100bytes>
TrangoLink GigaPLUS
Reset will not change the remark settings
reset
N/A
N/A
reload in x
<1-240> minutes
10 minutes
rps
<on|off>
off
rssi
Duration <1-99>
Default 1 (if duration not entered by
user)
show
<passwords>
CLI View Node: trango
CLI Config Node: trango
SNMP read comm: public
SNMP write comm: private
Web Interface: trango
snmp trap: trapstr
siglevel
N/A
N/A
smart_mode
<on | off >
On
snmpd
<on | off >
On
speed
<channel_bw> <modulation>
<30> <qam32>
channel_bw
4/5/7/8/10/12/14/20/25/28/30
/40/50/55/56/80
30
modulation
qpsk, qam16, qam32,
qam64,qam128,qam256
qam32
status
<clear/compare/modem/pll/port/
Remote/save/tdm>
N/A
sync
N/A
N/A
sync_status
N/A
N/A
sysinfo
<0-6>
0 (if command executed without any
param)