aAb!
a
Current single-digit WMT700 address that corresponds to the first character of the
address value
A
Change address command
b
New address
!
Terminates the command
The response:
b<CR><LF>
b
New single-digit WMT700 address (or the original address if WMT700 is unable to
change the address)
<CR><LF>
Terminates the response
5.26.1.4 aC! — Start Concurrent Measurement
This command starts concurrent measurement. WMT700 does not return measurement data
after this command. It sends a response that indicates when the measurement result can be
retrieved using the aD0! command and the number of parameters.
aC!
a
Single-digit WMT700 address that corresponds to the first character of the address
value
C
Start concurrent measurement command
!
Terminates the command.
The response:
atttnn<CR><LF>
a
Single-digit WMT700 address that corresponds to the first character of the address
value
WMT700 User Guide M211095EN-H
156
To Next Page
Loading...
