aI!
a
Single-digit WMT700 address that corresponds to the first character of the address
value
I
Send identification command
!
Terminates the command
The response:
allccccccccmmmmmmvvvxxx . . . xxx<CR><LF>
a
Single-digit WMT700 address that corresponds to the first character of the address
value
11 SDI-12 version number, indicating SDI-12 version compatibility; for example, version 1.1 is
encoded as 11
cccccccc 8-character vendor identification Vaisala
mmmmmm 6 characters specifying the model number of WMT700
vvv 3 characters specifying the firmware version 604
xxx ... xxx Optional field, up to 13 characters, used for a serial number or other specific WMT700
information that is not relevant for operation of the data recorder (not used)
<CR><LF> Terminates the response
5.26.1.7 aM! — Start Measurement
This command starts measurement. WMT700 does not return measurement data after this
command. It sends a response that indicates when the measurement result can be retrieved
using the aD0! command and the number of parameters.
aM!
a
Single-digit WMT700 address that corresponds to the first character of the address
value
M Start measurement command
! Terminates the command.
The response:
WMT700 User Guide M211095EN-H
158
To Next Page
Loading...
