Valtra 6550 - Page 1332

Blue
Yellow ---Green
Brown
ETV 894 100
ETV 894 220
Black (1)
Blue (2)
Red (3)
Direction A
261
Model Code Page
101. Special tools
1. 10. 1999
6000--8950
101
1
1. 9. 2002
31. Σ--- P o w e r
ETV 894 310 Test cable to make fault tracing in Σ ---Powersystemfromser.no.G22507 incl .
ETV 894 310
32. Hydraulic power lift (AC, ACD, ACB)
A
ETV 894 100 Cable for measuring internal voltages of posit ion and draft sensors (AC, ACB and ACD)
ETV 894 220 Cable to check control valve solenoid valves (Y1E, Y2E) (see pages 320/14 (AC) and 321/9 (ACB/ACD)).
1
2
3
A
Y1E,
Y2E
37. Autocontrol 5/5.2 (HiTech)
(see picture on page 370/24C (AC 5) or 371/26 (AC 5.2))
Ordering no. Description
337 00 600 Programming cable L=1,5 m. To be used when programming AC 5/5.2 control unit, which is fitted on
tractor.
337 00 610 Programming cable L=8 m. To be used when programming AC 5/5.2 control unit, which is fitted on
tractor.
340 42 500 Programming device for AC 5/5.2 and control units. To be used when programming
removed control units. Supply voltage 230 V 50/60 Hz, Euro---socket. In some markets must be used a
separate adapter.
340 42 260 Computer disk (3½, Win. 95/98) to program AC 5 control unit (incl. program versions 53,65 and
parameter files).
344 04 620 Computer disk (3½, Win. 95/98) to program AC 5.2 control unit (incl. program version 86 and
parameter files).
ETV 894100 Cable for checking internal voltages of clutch and gas pedal position sensors. (AC5)
ETV 894510 Cable for checking internal voltages of clutch and gas pedal position sensors. (AC5.2)