Valtra 6550 - Special Tools

815
Model Code Page
46. Power take ---off
1. 8. 1998
6000--8750 460 3
1. 4. 1997
Special tools
A
ETV 890 220 Universal handle
ETV 891 870 Plate for fitting PTO shaft seal (Gearbox 505---905)
ETV 894 080 Drift for fitting selector fork rail locking ball (Gearbox 6100---8100)
ETV 894 420 Ring for fitting PTO shaft new cassette seal (to be used with below listed sleeves)
ETV 894 430 Sleeve (ø 35) for fitting PTO shaft new cassette seal (to be used with above mentioned ring)
ETV 894 440 Sleeve (ø 44,6) for fitting PTO shaft new cassette seal (to be used with above mentioned ring)
B
ET 894 000 Tool for unscrewing loc king flange (earlier version) at front end of PTO shaft (Steering system 505---905)
ET 894 090 Sleeve for fitting PTO clutch circlip
ETV 891870
ETV 890220
ET 894 090
ET 894000
ETV 894 080
ETV 894 420
ETV 894 430
ETV 894 440
Max. PTO output at 1000 r/min (at engine revs 2080 r/min kW (hv ))
6000 6100 6300 6400 6600 6800 8000 8050 8100 8150 8200 8400 8450 8550 8750
45
(61)
49
(67)
53
(72)
60
(81,5)
66
(90)
73
99)
63,5
(86)
69
(94)
76
(103)
79,5
(108)
81,5
(111)
92
(125)
92
(125)
104
(141)
124
(169)