EasyManua.ls Logo

Valtra 6550 - Spare Part Numbers for Sensors and Plug; Further Information on Agrodata Operation

Valtra 6550
1361 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
329
Model Code Page
33. Valmet Agrodata
8. 11. 1990
6000--8400 330 5
Spare part numbers for sensors and plug
Wheel sensor/sensor for detecting movement of part of imple-
ment: 31703200 (2--- pole sensor)
Piece counter/flow meter: 31703000 (3---pole sensor)
Plug: 31702900
C. Further information on Agrodata oper-
ation
--- Any short---circuit device may be use as a sensor (Eg.
mechanical relays)
--- Only original magnets should be used. If the magnet is not
strong enough malfunctions will occur.
--- The full supply voltage should not be connected to the sen-
sor, because this may cause damage to the sensors.
---The unit will not be damaged if the power supply wires are
connected in reverse.
--- The monitor bulbs cannot be changed in the present mo-
dels. They are 10000 hour bulbs, and they not only illuminate
the display but also dry out internal moisture.

Table of Contents

Related product manuals