143
Model Code Page
31. Tractor electrical system
1. 8. 1998
6000--8750 310 3
8. 11. 1990
Headlight adjustment
Correct adjustment of the headlights is very important when
running on the public highway.
Headlight adjustment can be carried out quickly and accu-
rately by using an optical headlight adjusting unit. If no optical
instrument is available, adjustment can be done as follows:
Check before adjusting the headlight that the tractor loading
is normal and tyre pressures are correct.With dipped ---beam
switched on, the cutoff edge of the light pattern should come
at height H when the tractor is at distance L. With full---beam
switched on, the distance between the light points should be
B. Any necessary adjustment is done with the headlamp ad-
justing screws.
Measurements:
L=5m
B =Distance between headlight centres
H =Height of headlights above ground minus 50 mm
Standard trailer socket
1. Brake light (red)
2. LH side direction indicator (yellow)
3. Earthing (white)
4. RH side direction indicator (violet)
5. RH side parking light (brown)
6. Permanent current, max. 15 A. This current can only be cut
with the main current switch (if fitted).
7. LH side parking light (black)
To Next Page
Loading...
