Valtra 6550 - Final Drives; Power Take

263
Model Code Page
101. Special tools
1. 9. 2002
6000--8950
7101
1. 8. 2000
45. Final drives
Part. no. Description
ETV 890 220 Universal handle
ETV 892 260 6600 and 8100; Plate for fitting outer drive shaft inner bearing race
ETV 893 690 6600 and 8100; Plate for fitting outer drive shaft inner oil seal (Final drives 305---555)
ETV 893 310 6100---6400 and 8000; Plate for fitting outer drive shaft inner oil seal (Final drives 505--- 905
ETV 893 320 6100---6400 and 8000; Plate for fitting outer drive shaft bearing race (Final drives 505---905)
ETV 894 470 6200---8950: Tool to fit the cassette seal (rear axle housing with greater oil volume)
ETV 894 480 6200---8950: Guide sleeve to assemble the final gears (rear axle housing with greater oil volume)
ETV 894 490 6200---8950: Guide pipe to assemble the final gears (rear axle housing with greater oil volume)
ETV 894 550 8350---8950Hi: Fitting tool for cassette seal in final drives 700.
ETV 894 560 8350 --- 8950Hi: Guide pipe to assembling the final drives 700.
Locally prepared tools
ET 893 410 Support for removing outer drive shaft bearing race (Final drives 505---905)
ETV 892 260
ETV 890220
ETV 893 690
ETV 893 310
ETV 893 320
ET 893 410
ETV 894 470
ETV 894 480
ETV 894 490
ETV 894 560
ETV 894 550
46. Power take---off
A
ETV 890 220 Universal handle
ETV 891 870 Plate for fitting PTO shaft seal (Gearbox 505---905)
ETV 894 080 Drift for fitting selector fork rail locking ball (Gearbox 6100---8100)
ETV 894 420 Ring for fitting PTO shaft new cassette seal (to be used with below listed sleeves)
ETV 894 430 Sleeve (ø 35) for fitting PTO shaft new cassette seal (to be used with above mentioned ring)
ETV 894 440 Sleeve (ø 44,6) for fitting PTO shaft new cassette seal (to be used with above mentioned ring)
B
ET 894 000 Tool for unscrewing loc king flange (earlier version) at front end of PTO shaft (Steering system 505---905)
ET 894 090 Sleeve for fitting PTO clutch circlip
ETV 891870
ETV 890220
ETV 894 080
ET 894 090
ET 894 000
ETV 894 420
ETV 894 430
ETV 894 440