348
Model Code Page
34. Autocontrol ---III
8. 11. 1990
6600E, 8100E 340 2
15. 6. 1992
4. Quick---shift gear
Automatic changing A1
Automatic changing A2
--- Gear changing according to the
max. torque. Economical, changes
later and allows the engine revs to
fall.
--- Gear changing according to the
max. effect. Changes earlier and
does not allow the engine revs to
fall.
--- Automatic gear changing, which changes
to the lower gear when accelerating and to
the higher gear when decelerating (in both
ranges A1 and A2)
3. Differential lock
Diff. lock engages Diff. lock disengages
--- when one rear wheel rotates 25 % faster than
the other
--- when the rear wheel slip is less than 10 %
during a period of one second.
--- when the brake pedal/pedals is/are pressed
(also in the manual (M) position)
--- when the clutch pedal is depressed
--- when the front wheel steering angle is more
than ±10˚
--- when the tractor driving speed is over 12
km/h
--- when the tractor is stopped
(Also manual control can be selected with a switch)
(Also manual control can be selected with a switch)
To Next Page
Loading...
