Clutch servo
Figure 3. Clutch servo
1. Measurement X = 14 ---15 mm. On the hydraulic clutch
rel ease mechanism X=9 ---10 mm. After adjustment, make sure
that the pedal returns freely to the upper positi on.
2. The upper spring reduces the pedal force in the beginning of
the pedal movement and acts as a damper when the pedal is
released.
3. The spring is locked with a pin when assembling. Fit the pin
split side downwards.
4. All sliding and bearing surfaces must be greased with uni-
versal grease when fitting the cl utch servo.
S9 = Safety circuit breaker (when starting)
S24 = Switch for disengaging the quick---shift gear
The clutch servo reduces pedal force by about 40 per-
cent. The clutch servo is standard equipment on
6100---8100 tractors.
639
Model Code Page
41. Clutch
15. 4. 1995
6000--8750 410 5
8. 11. 1990
1
3
~10
2
4
4
To Next Page
Loading...
