762
Model Code Page
441. Quick ---shift gear
6100--8400 441 2
15. 5. 1993
8. 11. 1990
11. Place trestles equipped with castors under the fuel tank.
Support the gearbox under the front edge and also place sup-
port under the towing hook (rear frame is rear---heavy).
12. Unscrew the bolted joint between the gearbox and fuel
tank.
13.Rollthefrontframeapartfromthegearbox.
Note! Pass the 2---step quick---shift gear solenoid wire so that
it does not damage when the frame is split.
B . D e t a c h i n g 2 --- s t e p q u i c k --- s h i f t g e a r
from the reverse shuttle
Important! 3---step quick shift gear (Delta Powershift), see
page 444/1.
1. Disconnect the quick---shift gear solenoid wire connector.
Carefully pull out the long pump drive shaft. Do not damage
the seals.
2. Disconnect the oil pipes from the quick---shift gear.
3. Unscrew the quick---shift gear fixing bolts and remove the
quick---shift gear.
4. Remove the centring ring and o---rings between the quick---
shift gear and the reverse shuttle.
To Next Page
Loading...
