CO Related Admin (PGM 140/141/142/143/146/147) 2-49
Chapter 2: SBX IP Offline PCAdminPro
SBX IP - PC Admin Guide
CO Line Attributes III (PGM146)
ITEM RANGE DEFAULT REMARK
Incoming
Prefix Code
Insertion
ON/OFF OFF If this value is set to ON, a prefix code will
be attached in front of incoming CLI.
Outgoing
Prefix Code
Insertion
ON/OFF ON If this value is set to ON, a prefix code will
be attached in front of outgoing CLI.
ISDN Line
Type
u-Law/A-Law A-Law This value is used to set the ISDN CODEC
Type.
Calling Sub-
Address
ON/OFF OFF If this value is set to ON, the calling party
sub-address of the ISDN station is
attached when an ISDN station makes an
outgoing CO Call through this CO Line.
DID DGT
Receive
Number
2-4 3 This value is used as count of the received
DID Digit number to route DID incoming
Call.
DID Digit
Mask
4 digits #*** When the DID Conversion Type (PGM 143
- FLEX 4) is set to 0, the received DID
digits are converted by this value.
The digits 0-9, #, * can be entered.
# means to ignore received digit, and *
means to bypass the digit.
The length of DID Digit Mask is 4.
e.g.) "1234" is received when DID Digit
Mask is set as "#8**", the digit is converted
as "834".
R2 Collect
Call
0: Disable
1: Double
Answer
2: With
Indicator
Disable If this feature is set to ON (1,2), R2 collect
call is served
Collect Call
Answer Timer
001-250 010 This feature is used when R2 call is
answered (Brazil only)
Collect Call
Idle Timer
001-250 010 This feature is used when R2 call is
answered (Brazil only)
To Next Page
Loading...
