System Timers I - III (PGM 180, 181,182) 2-80
Chapter 2: SBX IP Offline PCAdminPro
SBX IP - PC Admin Guide
SLT DTMF Release Timer 00-20
(2 digits)
00
(sec)
--
3 Soft Auto Release Timer 01-30
(2 digits)
05
(sec)
--
VM Pause Timer 01-90
(2 digits)
30
(100ms)
--
Transit Connect Timer 01-30
(2 digits)
04
(sec)
--
VMIB MSG Rewind Timer 01-99
(2 digits)
05
(sec)
--
LCO Connect Timer 00-20
(2 digits)
00
(sec)
--
LCO CPT Detect Timer 00-20
(2 digits)
05
(sec)
--
Forward to VMIB Timer 20-60
(2 digits)
20
(sec)
If the Auto FWD to VMIB feature (PGM 113 - FLEX 14) is
set to a station, the call is automatically forwarded to
VMIB after this timer expires, so the caller can leave a
voice message.
System Timers - III (PGM 182)
ITEM RANGE DEFAULT REMARK
SLT Hook Switch Bounce
Timer
01-25
(2 digits)
01
(100ms)
This timer establishes the length of time that is needed to
regard as a valid on-hook or off-hook.(for SLT).
SLT Maximum Hook
Flash Timer
001-250
(2 digits)
050
(10ms)
This timer establishes how long the user could depress
the hook switch in order for it to be considered a FLASH
(Timed-Break Recall). (for SLT)
SLT Minimum Hook Flash
Timer
000-250
(3 digits)
020
(10ms)
The minimum bound time that system considers as a
hook flash for an SLT.
SLT Ring Phase Timer 2-5
(1 digit)
5
(sec)
Determines the ring phase of SLTs.
(5 SEC: 1 SEC ON / 4 SEC OFF)
System Timers - II (PGM 181)
ITEM RANGE DEFAULT REMARK
To Next Page
Loading...
