SIP Attributes 1 & 2 2-128
Chapter 2: SBX IP Offline PCAdminPro
SBX IP - PC Admin Guide
Operation
A Proxy Server Address can be assigned text data or an IP address. The maximum length of
this field is 32 characters. You must enter the proxy server address if you are usinga proxy
server in your SIP application.
A primary and secondary DNS address can be entered the same as a proxy server address.
You can enter an IP address or text of up to 32 characters.
You can also leave these fields empty.
A User ID, Authentication User Name, and Authentication User password can be entered as
text and numeric data. The maximum length of these fields is 64 characters.
The type of Contact Number should be numeric. Otherwise, PCADM will display an error
message.
An Authentication user Password Repeat is used to confirm the user password. If there is no
user password, this field should be empty. If password exists, you should enter the same value
in this repeat field.
To Next Page
Loading...
