System Attributes (PGM 160/161/163) 1-66
Chapter 1: SBX IP Online PC Admin
SBX IP - PC Admin Guide
System Attributes I (PGM160)
ITEM RANGE DEFAULT REMARK
Attendant Call
Queuing
Ringback
Tone
RBT/MOH MOH MOH: The station will present ring back
tone when calling busy attendant station.
RBT: The station will present MOH, hold
tone, or DVU-MOH by system database
(PGM 171-BTN 2)
Camp-on
RBT/MOH
RBT/MOH MOH MOH is heard in camp-on
or Ringback tone is heard in camp-on.
CO Line
Choice
LAST\
ROUND
LAST The method of a CO line seizing on CO
Line Groups access
DISA Retry
Counter
0-9 3 When the DISA user fails to call Station or
access a feature, then the DISA user can
retry another call or feature within the limit
of the retry counter. If the DISA user
cannot access appropriately within this
counter, the system disconnects the DISA
Line automatically.
ICM
Continuous
Dial Tone
CONT/
DISCONT
CONT This field sets whether ICM dial tone is
continuous or not.
CO Dial Tone
Detect
ON/OFF OFF When the speed dial is activated, system
detects dial tone using CPT instead of
pause timer.
External Night
Ring
ON/OFF OFF When CO lines are marked to UNA,
ringing will be sent to LBC1 when an
incoming call occurs on those lines during
night service.
Hold
Preference
SYS/EXEC SYS System hold or exclusive hold
Multi-line
Conference
ON/OFF ON The system allows a conference with
multi-CO lines.
Print LCR
Conv Dgt
ON/OFF OFF Print dialed digits or LCR conversed digits
in LCD
To Next Page
Loading...
