EasyManua.ls Logo

wsm M7060 - Pto Hydraulic Clutch Section; PTO Hydraulic Clutch

wsm M7060
639 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TRANSMISSION
M6060, M7060, WSM
2-M18
[3] PTO HYDRAULIC CLUTCH SECTION
(1) PTO Hydraulic Clutch
The PTO clutch pack has five clutch disks (5), five
drive plates (6), a belleville washer (cupped spring
washer) (8) and one pressure plate (4). The clutch piston
(7) actuated by hydraulic from PTO clutch valve, tightly
presses the clutch disks (5) and drive plates (6) toward
the pressure plate (4).
As a result, the rotation of the PTO propeller shaft 1
is transmitted to the PTO propeller shaft 2 (3) through the
PTO clutch pack (2).
The belleville washer (cupped spring washer) (8)
reduce the engaging shock. Thereby, the PTO clutch is
engaged very smoothly.
9Y1210828TRM0018US0
(1) PTO Propeller Shaft 1
(2) PTO Clutch Pack
(3) PTO Propeller Shaft 2
(4) Pressure Plate
(5) Clutch Disk
(6) Drive Plate
(7) Clutch Piston
(8) Belleville Washer
(Cupped Spring Washer)
KiSC issued 08, 2013 A

Table of Contents

Related product manuals