wsm M7060 - 2 Nd Shaft; 3 Rd Shaft

TRANSMISSION
M6060, M7060, WSM
2-S42
(4) 2nd Shaft
2nd Shaft Assembly
1. Remove the bearing (1) and (10).
2. Remove the gears.
9Y1210828TRS0064US0
(5) 3rd Shaft
3rd Shaft Assembly
1. Remove the bearing (1) and (15).
2. Remove the gears.
(When reassembling)
• Apply molybdenum disulfide (Three Bond 1901 or equivalent) to
the inner race (4).
• Apply transmission fluid to the needle bearing (13).
9Y1210828TRS0065US0
(1) Bearing
(2) 46T Gear
(3) 41T Gear
(4) 29T Gear
(5) 25T Gear
(6) External Circlip
(7) 37T Gear
(8) 33T Gear
(9) 2nd Shaft
(10) Bearing
(1) Bearing
(2) Collar
(3) Thrust Collar
(4) Inner Race
(5) 27T Gear
(6) Spline Boss
(7) Shifter
(8) 44T Gear (Creep)
(9) Bearing
(10) Collar
(11) 24T Gear Shaft (3rd Shaft)
(12) 44T-24T Gear
(13) Needle Bearing
(14) 27T Gear
(15) Bearing
KiSC issued 08, 2013 A