GENERAL
M6060, M7060, WSM
G-91
9. TIRES
[1] TIRE SIZE AND INFLATION PRESSURE
To avoid personal injury:
• Do not try to mount a tire on a rim. This should be done by a qualified person with the proper equipment.
• Always keep the correct tire pressure. Do not inflate tires above the recommended pressure show in the
operator's manual.
• Do not use tires other than those approved by KUBOTA.
• Dual tires are not approved.
• Excessive wear of the tires may occur due to improper gear ratio.
• When optional different-diameter tires are fitted on the machine, the travel speed display mode must be
changed. Otherwise the travel speed will not get correctly displayed. Such mode switching is also needed
when the original tires are back on the machine. (See page 8-S30.)
9Y1210828GEG0127US0
To Next Page
Loading...
