Xerox 8830 Service Manual

SYMBOLOGY A tag number within a circle having a shaded bar and pointing to A tag number within a circle with no apex shows that the entire
an item number shows that the configuration of the part shown is drawing has been changed by the tag number within the circle
A tag number within a circle and pointing to an Item number the configuration before the part was changed by the tag number (Figure 3). Information on the modification is in the Change Tag
shows that the part has been changed by the tag number within within the circle (Figure 2). Index,
the circle (Figure 1). Information on the modification is in the
Change Tag Index.
W7PI
(A29WIJI)
Figure 1. With Tag Symbol
0 | 2004
95O| PL |M
A
I
22
o | zoos
85O| PL
M
A
I
Figure 2. Without Tag Symbol
0 2006
8 50| PL | M
A
I
Figure 3. Entire Drawing With Tag Symbol
A tag number within a circle with no apex and having a shaded
bar shows that the entire drawing was the configuration before
being changed by the tag number within the circle (Figure 4).
Figure 4. Entire Drawing Without Tag Symbol
8830
9/97
5-3
PARTS LIST SECTION
INTRODUCTION

Xerox 8830 Specifications

General

Brand	Xerox
Model	8830
Category	Printer
Language	English