Xerox 8830 - Page 245

Code
[1032]
[1033]
[1034]
[1035]
[1036]
Description
Specify Web Oil Rate.
This is used to adjust the
web oil rate from 50% to
200%. (A 100% setting Is
nominal.) This setting
directly impacts the life of
the Oil Web. 50% means
that 1/2 as much web is
used.
Advance Oil Web.
Used to tension the web
correctly when the oil
assembly is removed and
reinstalled.
Estimate Oiler Web Life.
Displays the remaining
web life in print feet or
meters
Disable LL-07 Oiler Fault
Detection
Disable LL-12 Fault
Detection (Drum Stall)
Value
Code
[1060]
[1062]
[1063]
[1101]
[1401]
[1402]
[1403]
Description
Fuser Temperature bond
media adjustment. Allows
the adjustment of the
Fuser Run Temperature:
300* F(149'C)with36
inch wide bond media.
Refer to ADJ 10.1 Fuser
Temperature.
Fuser Temperature
vellum media adjustment:
294 F (146*C). Refer to
ADJ 10.1 Fuser
Temperature.
Fuser Temperature film
media adjustment:
300 F (149 °C). Refer to
ADJ 10.1 Fuser
Temperature.
Folder Status
Loopback Test for
Remote Access Interface
Loopback Test for
Controller Command
Status
Loopback Test for
Finisher Port
Value
8830
1/98
6-9
Diagnostics